Your trust Is Our Responsibility
Inspire make Cold Water Bath are Different Designed to cool faster with low energy cost and maintain the temperature for longer time. To Maintain the temperature in to the bath circulation is done by either one 0r two pumps Or Motor as depending on the volume of bath. Temperature is controlled by Auto Tune PID Controller. In Large Size of Bath Gives Separate bath for heating and Cool water is circulated to the other chamber so as to save the energy cost. Hot Water Bath are Used for long & Short Term Hydrostatic Pressure test of pipes. These bath are made as per International Standards to provide the Cooling Media to The Product.
Size | 1220 X 760 X 460 mm. ( Inner Size) & As per Requirement. |
Temp. Range | Ambient To 27° C. |
Resolution | 0.1° C. |
Accuracy | +/- 0.5 % |
Material Construction | Inner S.S. & Outer M.S. With Powder Coated Or Paint. |
Power Supply | 415 V , 3 Phase , 50 HZ. |
Our organization, “Inspire Plastotherm Pvt. Ltd.”, is a leading manufacturer of a comprehensive range of PVC Pipe Socketing Machines, Lab Equipments that offer critical solutions to a number of industries. We apply variety of combinations and versions to make our range highly applicable under toughest of working conditions.
All Rights Reserved by Inspire Plastotherm Pvt. Ltd.